Home / Blog / Article

New Sod in the Inland Empire: Prep, Install, and First-Month Care

What goes into a sod installation that lasts in Inland Empire heat, from soil prep and sprinklers to watering new sod the first few weeks.

Crew member laying new sod rolls in a residential side yard

New sod can turn a dirt or patchy yard into a green lawn in a day. Whether it stays that way depends on what happens underneath and in the first few weeks.

Start with the sprinklers

Sod needs even, consistent water while it roots. Before any sod goes down, every zone should be checked for coverage, broken heads, and leaks. Fixing the system first is far easier than digging up new grass later. If the old system is failing, it may be the right time for a new sprinkler installation.

Soil prep matters

  • Remove old grass, weeds, and debris.
  • Grade the area so water drains away from the house and does not pool.
  • Loosen and prepare the soil so new roots can grow down.

Install day

Sod should be laid soon after delivery, with seams tight and staggered like brickwork. Edges along walkways and planters should be cut clean. A planter border helps keep the lawn edge crisp for years.

Watering new sod

  • First week or two: keep the sod and the soil just under it moist. That usually means short, frequent watering.
  • As roots take hold, water less often but longer to encourage deep roots.
  • In hot weather, check the edges and corners. They dry out first.
  • Stay off the new lawn as much as possible until it is rooted.

Avoid these common problems

Dry seams, mushy spots, and yellow patches usually trace back to uneven watering. If one area is always too wet and another too dry, the sprinklers need adjusting.

Thinking about a new lawn? Learn more about our sod installation service or request a free estimate.

Ready for a healthier, better-looking yard?

Call for a free estimate or send us a few details and we will set up a time to look at your yard.